Skip to content

How To Set The Clock On A Maytag Electric Stove

To set the clock on a Maytag electric stove, first locate the clock. It is usually in the front of the stove, near the oven door. Once you have found it, use your fingers to pull the tab that is holding the clock in place. Hold onto the tabs on each side of the clock and pull it out until it clicks into place. Now, use your fingers to turn the knob on the front of the clock to set the time.

How To Set The Clock On A Maytag Electric Stove

Instructions for setting the clock on a Maytag electric stove vary depending on the model. For example, the manual for the Maytag MES5770AAB electric stove states that to set the clock, hold down the “Clock” button for 3 seconds until the clock flashes, then use the “+” or “-” buttons to change the time. The manual for the Maytag MEDC555DW states that to set the clock, first locate and press the “Clock” button.

Timer knob Clock dial Maytag electric stove

  • Plug in the stove
  • Locate the clock on the front of the stove
  • Push in and turn the clock to set the time

1. Check the owner’s manual to see if the clock is adjustable. 2. If the clock is not adjustable, try a household timer to set the time. 3. If the timer does not work, call a repairman.


Frequently Asked Questions

How Do You Change The Time On A Maytag Gemini?

To change the time on a Maytag Gemini, you must first locate the time set button. It is usually located in the lower right-hand corner of the control panel. Once you have found it, press and hold it for three seconds. This will illuminate the numbers on the clock. Next, use the arrow buttons to set the correct time. Finally, release the time set button and your new time should be saved.

How Do I Reset My Maytag Oven Control Panel?

There is not a specific, foolproof way to reset a Maytag oven control panel. Sometimes unplugging the oven for a few minutes and plugging it back in will do the trick. Otherwise, there may be a specific reset button or procedure for your specific oven model. Refer to your oven’s owner’s manual for more information.

How Do I Reset My Oven Control Panel?

If your oven control panel is not functioning correctly, you can try resetting it by unplugging the oven for a few minutes and then plugging it back in.


Wrap-Up

The clock on a Maytag electric stove is set using the control panel. The time can be adjusted by pressing the up or down arrow buttons.

Leave a Reply

Your email address will not be published.