Skip to content

How To Measure Full Overlay Cabinet Doors

Full overlay cabinet doors are the standard for frameless cabinets. The door overlaps the front of the cabinet box by about 1-1/4″ on all sides. This type of construction allows the door to close tightly against the cabinet face frame, providing a clean look. There are a few different ways to measure for full overlay cabinet doors. One method is to use a template that corresponds to the size of your opening. Another method is to measure the width and height of the

How To Measure Full Overlay Cabinet Doors

There are a few different ways to measure full overlay cabinet doors. One way is to measure the door from the inside edge of the cabinet frame to the inside edge of the door. Another way is to measure the door from the outside edge of the cabinet frame to the outside edge of the door. The third way is to measure the door from the top of the cabinet frame to the bottom of the door.

-Tape measure -Plywood or MDF -Circular saw -Ruler or a straight edge -High-grit sandpaper -Stiles -Construction adhesive -Cordless drill -1 inch hole saw -Paint or a sealant -Latch -Knob or handle

  • Measure the height and width of the cabinet opening
  • Determine the overlap needed
  • Subtract 1/8 inch from both the height and width of the cabinet
  • Measure the height and width of the cabinet door

-Measure the width of the cabinet opening. -Measure the height of the cabinet opening. -Measure the depth of the cabinet opening. -Determine the desired width of the cabinet door. -Determine the desired height of the cabinet door. -Determine the desired depth of the cabinet door. -Select a style of door that will be appropriate for the measurements and desired look.


Frequently Asked Questions

How Much Gap Do You Need For Full Overlay Cabinet Doors?

There is no set standard for the gap needed between cabinet doors for a full overlay, but a general rule of thumb is 1/8″ – 1/4″.

How Are Full Overlay Drawer Fronts Measured?

A full overlay drawer front is measured from the inside of the cabinet to the outside of the drawer front.

How Do You Measure For Cabinet Overlay Doors?

When measuring for cabinet overlay doors, you will need to measure the width and height of the opening and compare it to the width and height of the door. If the opening is smaller than the door, you will need to account for the gap between the door and the cabinet. The gap can be filled with a filler strip or trim.


To Summarize

There are a few ways to measure full overlay cabinet doors. One way is to measure the height, width, and thickness of the door, and then use those measurements to calculate the overlay. Another way is to measure the opening of the cabinet, and then use those measurements to calculate the overlay.

Leave a Reply

Your email address will not be published.